Nodal Ninja Panoramic Photography Equipment
18
Years since 2004

Tutorials

1

Close

Factory Presets for Fisheye Lenses – MECHA C2

For Firmware (1)2355 or newer.

In this video, we are going to show you how to select and launch a preset for a fisheye lens, using the Preset Menu of the MECHA C2 controller.

Power MECHA on by pressing and holding the power button for about 3 seconds. 

Use the down arrow button to navigate to the "+ FE 12 mm NZ Level" option, which is a factory preset for a fisheye lens.

Press the plus button to enter edit mode, then press either the plus or minus button to display the available focal lengths. 

Find the desired focal length, then confirm with the center button.

Now you can launch the preset as usual, by pressing the center button and specifying the direction of rotation (with the right or left arrow button).

Here is how the stitched panorama should look like in the panorama editor. 

And this is the MAP featuring the overlap between images. 

In the same way, select and launch a preset for a 16mm/20mm/24mm fisheye lens.

Power off MECHA by pressing and holding the power button for about 3 seconds.


© 2013-2022 Fanotec® - Nodal Ninja® | All rights reserved.