Nodal Ninja Panoramic Photography Equipment
Years since 2004




Firmware Update Using a Hot-spot – MECHA C2

In this video, we are going to show you how to update the firmware of MECHA C2.
First, power MECHA on by pressing and holding the power button for 3 seconds, and wait 45 seconds.
Use this update method for version (1)2201 or newer.
Activate a hot-spot on a 3G, 4G or 5G smartphone (in 2.4 GHz band). 
Set the name: MECHA-UPDATE, and password: 87654321
For exact instructions, please refer to your device's user guide.
Long press the menu button to show the Preset menu on C2's display.
Then press the menu button again - short, normal press this time - to switch to Config menu.
Press the left button to select page 8.
The left and right buttons allow you to go to the previous and next page.
Each menu has 8 pages, and each page has several options.
Go to the next option using the down arrow button.
Press this button several times, until UPDATE USING H-SPOT appears on the display.
Press the middle button to launch the update. This could take up to 5 minutes.
Now you can deactivate the hot-spot.
Power MECHA off, then power it on, and you're done.

© 2013-2023 Fanotec® - Nodal Ninja® | All rights reserved.