Announcement

Collapse
No announcement yet.

Mecha E1 Automated Rotator - panning Timelapse

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Mecha E1 Automated Rotator - panning Timelapse



    nodalninja - Mecha E1 Timelapse

    very Good Mecha E1

    eosR + ef 16-35 iii (20mm)

    3h30m

    0.05deg

    2,337cut

    question :

    1. minimum deg ? (I want deg to be 0.01)


    2. When is the next release about 2kg or more ready for installation?


  • #2
    Thanks for sharing.
    For start-stop motion, min step is 0.05 deg.
    In the future, there will be feature of non-stop motion with shutter trigger. Then smaller interval is possible. But for 3 Hr 30 Min, it is likely a start-stop start-stop motion.
    0.01 degree is too fine for our rotators. It will either require a large reduction ratio or use of higher resolution motor which has lower efficiency and lower torque. High reduction ratio requires larger gear train and has a lower max speed.
    Fanotec
    We listen. We try harder.

    Comment


    • #3
      Hey Venti - Welcome to the forum and thank you for sharing the awesome timelapse.
      Nodal Ninja - "turning heads"

      Comment

      Working...
      X