Announcement

Collapse
No announcement yet.

Quick Mount Mini Adapter System (F7154)

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • msimons
    started a topic Quick Mount Mini Adapter System (F7154)

    Quick Mount Mini Adapter System (F7154)

    As i use my R10 also on the Monopod i thought about the Quick Mount Mini Adapter. I already ordered at Panosociety but Jan said he must get the 1/4-inch screws to get that system to work with the Mecha. My questions are:

    Will the connection between plate and clamp be rigid enough to move / tilt the center column for nadir shot?
    Could you recommend this system for use with the Mecha?

  • nick fan
    replied
    Screws are included in the package. To get a 1/4-20 male, simply install a stud screw in the original socket. I will source one with proper length.

    Nick

    Leave a comment:


  • dzeek
    replied
    Where do you get the screws to fasten this to the Mecha?

    Is there also a version with 1/4-20 male?

    Leave a comment:


  • jimtron
    replied
    That's what I was looking for; thanks.

    Leave a comment:


  • nick fan
    replied
    https://shop.nodalninja.com/accessor...adapter-f1220/

    Leave a comment:


  • jimtron
    replied
    Thanks for the replies. I see that f7153 comes with the Quick Mount Adapter System (that's what it looks like in the photos). The part in the attached photo: does that come with that system (f7154)?

    Last edited by jimtron; April 2nd, 2019, 04:31 PM.

    Leave a comment:


  • Bill Bailey
    replied
    Quick Mount Mini Adapter System (F7154)
    https://shop.nodalninja.com/quick-mo...-system-f7154/
    Mount your NN3/4/5 or R1/R10 to the Pole system or Fanotec advanced rotators quickly and easily with the Quick Mount Mini Adapter System.

    Leave a comment:


  • msimons
    replied
    Originally posted by jimtron View Post
    Hi Msimons:

    Is that the mini adapter in the top photo? Do you have a link for that, I'm not finding it...
    Just google for "Quick Mount Mini Adapter". Impossible not to find it ...


    Leave a comment:


  • nick fan
    replied
    Good finding on another use of 3/8" male thread adapter. I should not be needed when you have a 1/4" screw for QM adapter plate. New stock should have this screw.

    Keep in mind the 2kg load limit though.


    Nick

    Leave a comment:


  • jimtron
    replied
    Hi Msimons:

    Is that the mini adapter in the top photo? Do you have a link for that, I'm not finding it...

    Leave a comment:


  • msimons
    replied
    After the QuickMount Adapter and plates arrived i also mounted the Rotator Mini adapter onto the Mecha to extend it with a 3/8-inch thread. Now i can both mount the QuickMount-Adapter but also other small ballheads and (act of sacrilege) other panoramic heads...

    Click image for larger version

Name:	image_1076.png
Views:	1
Size:	927.8 KB
ID:	29490
    Click image for larger version

Name:	image_1077.png
Views:	1
Size:	1.28 MB
ID:	29491

    Leave a comment:


  • nick fan
    replied
    yes, but anti-twisting screws should be installed on the bottom of clamp.

    Nick

    Leave a comment:

Working...
X