Announcement

Collapse
No announcement yet.

Quick Mount Mini Adapter System (F7154)

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Quick Mount Mini Adapter System (F7154)

    As i use my R10 also on the Monopod i thought about the Quick Mount Mini Adapter. I already ordered at Panosociety but Jan said he must get the 1/4-inch screws to get that system to work with the Mecha. My questions are:

    Will the connection between plate and clamp be rigid enough to move / tilt the center column for nadir shot?
    Could you recommend this system for use with the Mecha?

  • #2
    yes, but anti-twisting screws should be installed on the bottom of clamp.

    Nick
    Fanotec
    We listen. We try harder.

    Comment


    • #3
      After the QuickMount Adapter and plates arrived i also mounted the Rotator Mini adapter onto the Mecha to extend it with a 3/8-inch thread. Now i can both mount the QuickMount-Adapter but also other small ballheads and (act of sacrilege) other panoramic heads...

      Click image for larger version

Name:	image_1076.png
Views:	1
Size:	927.8 KB
ID:	29490
      Click image for larger version

Name:	image_1077.png
Views:	1
Size:	1.28 MB
ID:	29491

      Comment


      • #4
        Hi Msimons:

        Is that the mini adapter in the top photo? Do you have a link for that, I'm not finding it...

        Comment


        • #5
          Good finding on another use of 3/8" male thread adapter. I should not be needed when you have a 1/4" screw for QM adapter plate. New stock should have this screw.

          Keep in mind the 2kg load limit though.


          Nick
          Fanotec
          We listen. We try harder.

          Comment


          • #6
            Originally posted by jimtron View Post
            Hi Msimons:

            Is that the mini adapter in the top photo? Do you have a link for that, I'm not finding it...
            Just google for "Quick Mount Mini Adapter". Impossible not to find it ...


            Comment


            • #7
              Quick Mount Mini Adapter System (F7154)
              https://shop.nodalninja.com/quick-mo...-system-f7154/
              Mount your NN3/4/5 or R1/R10 to the Pole system or Fanotec advanced rotators quickly and easily with the Quick Mount Mini Adapter System.
              Nodal Ninja - "turning heads"

              Comment


              • #8
                Thanks for the replies. I see that f7153 comes with the Quick Mount Adapter System (that's what it looks like in the photos). The part in the attached photo: does that come with that system (f7154)?

                Last edited by jimtron; 3 weeks ago.

                Comment


                • #9
                  https://shop.nodalninja.com/accessor...adapter-f1220/
                  Fanotec
                  We listen. We try harder.

                  Comment


                  • #10
                    That's what I was looking for; thanks.

                    Comment


                    • #11
                      Where do you get the screws to fasten this to the Mecha?

                      Is there also a version with 1/4-20 male?

                      Comment


                      • #12
                        Screws are included in the package. To get a 1/4-20 male, simply install a stud screw in the original socket. I will source one with proper length.

                        Nick
                        Fanotec
                        We listen. We try harder.

                        Comment

                        Working...
                        X