GTP with R10 (Google Trusted Photographers)
Nodal Ninja Ultimate R10 7.5° Tilt with lens ring for Sigma 8mm fisheye is a very portable and easy to use package for Google Trusted Photographers.
Package Contents of R10 GTP Package
Depending on resellers, the package may come pre-assembled or individually with R10 tilt head, lens ring, Rotator Mini (RM) and bubble level.
Installing R10 Tilt Head and Bubble Level on Rotator Mini
Place the level on RM with bubble facing up. Place R10 tilt head on the level. Align for the mounting sockets. Install 2 M5 flat head screws to fix R10 head to RM. While the level is still movable, turn it to the rear right of R10 for best clearance of view and least footprint. Keep it at 2-3mm (1/8") clearance from R10 to prevent damage of bubble by accidental bumping of bubble into R10.
Mounting Lens Ring Clamp on the Tilt Head at the NPP
First of all, make sure the R10 head has an upward tilt. If not, reinstall it.
Install the lens ring on the lens according to its installation guide at the back. Mount the lens on the camera. Mount lens ring on QR clamp of R10. Tighten the clamp slightly.
Slide the lens ring plate (LRP) to the NPP setting. There are 3 lines marked on the QR clamp. Use the center line for distance reading. Other lines are 1.5mm apart from the center line. Use them to assist reading to an accuracy of 0.5 mm. Use the side opposite to the QR handle for best accuracy. NPP setting of Sigma 8mm F3.5 for Canon is 0.85. Check that the LRP has "LRP40" labeled at the base.
NPP setting of Sigma 8mm F3.5 for Nikon is 1.4. Check that the LRP has "LRP45X" labeled at the base.
Installing the Preset Integrated Stop Plate on Lens RingA preset integrated stop plate snaps to the LRP to form an internal part of it. It has predetermined NPP setting(s) specific for the lens, tilt head model and image shooting pattern. It makes the whole setup foolproof. Just mount the lens ring, slide until it falls into the stop. COMING SOON FREE OF CHARGE FOR GTP!
Verify the model number of the stop plate. "101" for Sigma 8mm F3.5 for Nikon. "102" for Sigma 8mm F3.5 for Canon.
Align the stop plate with the base of LRP. Push to snap it in place.
Install the stop screw (came with the stop plate) at the middle socket on the QR clamp. Remove any other safety screw installed. Mount the lens ring on the clamp. Slide until it falls into the stop. Confirm the reading with the published NPP settings.
Nodal Ninja Quick Reference Guides
Nodal Ninja Anti-Twisting Camera Mounting Plate
fr - Plaque d'attache rapide anti-rotation Nodal Ninja + video tutorial
Camera Plates with Anti-twisting Flange
Camera Plate C2
Specification for Fanotec Arca Style Camera Plates
Quick Release System Mounting Instructions
fr - Manuel de la plaque de montage rapide QRS2
Nadir Adapter for NN3, NN4 and NN5
EZ-Leveler II + video tutorial
Rotator Foot Plate for Poles
Replacing Upper Rotator Knob For Nodal Ninja Ultimate M1
fr - Remplacement de la molette supérieure de la rotule Nodal Ninja Ultimate M1
Nodal Ninja - RD8 + video tutorial
Nodal Ninja - RD16 + video tutorial
Nodal Ninja - RD3L + video tutorial
Nodal Ninja SPH-2
Nodal Ninja SPH-1
Fanotec Pole Series
Using Pole Series 1 and the Extension Unit
Using Pole Series 2 Upper and Lower Unit
Tripod Adapter (Type A) for Pole Series 1 and Series 2
Tripod Adapter (Type B) for Pole Series 1 and Series 2
Lens Ring Mounts
Lens Ring Component Build Chart
M1 Ultimate Series
Nodal Ninja Ultimate M1
Nodal Ninja Ultimate M1 - L/S
M1-S Ultimate Series
Nadir Adapter on M1L
fr - Guide d'installation de l'Adapteur Nadir pour Ultimate Modular M1-L
M2 Ultimate Series
Nodal Ninja Ultimate M2 Gimbal Pano Head With Rotator D8II or D16II
Nodal Ninja 180 w/RD4 + video tutorial
Nodal Ninja 3 MKII
Nodal Ninja 3 MKII w/RD3L + video tutorial
Nodal Ninja 3 MKII w/RD8 + video tutorial
Nodal Ninja 3 MKII w/RD12
Nodal Ninja 3 MKII w/RD16 + video tutorial
Nodal Ninja 4
Nodal Ninja 4 w/RD8
Nodal Ninja 4 w/RD16 + video tutorial
Nodal Ninja 5 + 5L
Nodal Ninja 5 w/RD8 + video tutorial
Nodal Ninja 5 w/RD12
Nodal Ninja 5 w/RD16 + video tutorial
Nodal Ninja Ultimate R1 - Ring Mount Pano Head
fr - Nodal Ninja Ultimate R1 - Tête pano avec anneau
GTP with R10 (Google Trusted Photographers)
GTP R10 Package for Sigma 8mm f/3.5 for Canon
GTP R10 Package for Sigma 8mm f/3.5 for Nikon
GTP R10 Package for Canon EF 8-15mm
Lens Ring for Sigma 8mm Fisheye Canon Mount
Lens Ring for Sigma 8mm Fisheye Nikon Mount
Lens Ring for Canon EF 8-15mm f/4 L USM
R1 NPP for Sigma 8mm F3.5 Canon and Nikon
R10 NPP for Sigma 8mm F3.5 Canon and Nikon
Only buy from authorized resellers. If buying new from other than an authorized reseller, no warranties or product support are included.
Exclusive distributors of the Fanotec product line. Fanotec develops and manufactures exclusively products to meet the needs of the panoramic photographer. We offer products such as the award winning Nodal Ninja, the CNC machined Ultimate Line, Carbon Fiber Aerial Poles, Levelers, and many more related accessories. Many of these items may also be used for general photography as well.
Check for a reseller in your country.
Nodal Ninja®, 3454 N. San Marcos Pl. Ste 9, Chandler, Arizona, 85225 USA
Customer Service ph: 480-659-9899 / fax: 480-452-0452 Hours: M-T-TH-F 8am-12pm
© 2013 Nodal Ninja® | Nodal Ninja® is a Registered Trademark - All Rights Reserved.