Loading


R1/R10

GTP R10 Package for Sigma 8mm f/3.5 for Canon



Nodal Ninja Ultimate R10 7.5° Tilt with lens ring for Sigma 8mm fisheye is a very portable and easy to use package for Google Trusted Photographers.

Package Contents of R10 GTP Package


Package Contents of R10 GTP Package
Spare Parts Qty
1/4"-3/8" adapter 1
2mm hex key 1
2.5mm hex key 1
3mm hex key 1
M4 x 5 set screw 2

Depending on resellers, the package may come pre-assembled or individually with R10 tilt head, lens ring, Rotator Mini (RM) and compass bubble level.


Installing R10 Tilt Head and Bubble Level on Rotator Mini


Installing R10 Tilt Head and Bubble Level on Rotator Mini
Place the level on RM with bubble facing up. Place R10 tilt head on the level as shown. Align for the mounting sockets. Install 2 M5 flat head screws to fix R10 head to RM.


Mounting Lens Ring Clamp on the Tilt Head


Mounting Lens Ring Clamp on the Tilt Head at the NPP
First of all, make sure the R10 head has an upward tilt. If not, reinstall it.
Install the lens ring on the lens according to its installation guide at the back. Mount the lens on the camera. Mount lens ring on QR clamp of R10. Tighten the clamp slightly.

Mounting Lens Ring Clamp on the Tilt Head
Slide the lens ring plate (LRP) to the NPP setting. There are 3 lines marked on the QR clamp. Use the center line for distance reading. Other lines are 1.5mm apart from the center line. Use them to assist reading to an accuracy of 0.5 mm. Use the side opposite to the QR handle for best accuracy.
NPP setting for 4 shots around 0.85. Check that the LRP has "LRP40" labeled at the base.

Mounting Lens Ring Clamp on the Tilt Head
To orient the panorama in the map, move the tripod so that the red pointer aligns with the white mark on the compass. Now the camera is pointing to the North. Look at the compass from the front for best reading accuracy.
Level the R10 head by adjusting tripod legs or a level adjustment device.


Installing the Preset Integrated Stop Plate on Lens Ring


Installing the Preset Integrated Stop Plate on Lens Ring
A preset integrated stop plate sets the lens at the NPP quickly and precisely. Verify the stop plate is marked "102". It is for Sigma 8mm f/3.5 for Canon on R10 7.5° up tilt and 4 shots around specifically.
Align the stop plate with the base of LRP. Push to snap it in place.

Installing the Preset Integrated Stop Plate on Lens Ring
Install the stop screw (came with the stop plate) at the middle socket on the QR clamp. Remove any other safety screw installed. Mount the lens ring on the clamp. Slide until it falls into the stop. Confirm the NNP reading is 0.85 (or 0.825 more precisely).

Nodal Ninja Quick Reference Guides



Accessories
Nodal Ninja Anti-Twisting Camera Mounting Plate
fr - Plaque d'attache rapide anti-rotation Nodal Ninja + video tutorial
Camera Plates with Anti-twisting Flange
Camera Plate C2
Specification for Fanotec Arca Style Camera Plates
Quick Release System Mounting Instructions
fr - Manuel de la plaque de montage rapide QRS2
Nadir Adapter for NN3, NN4 and NN5
EZ-Leveler II + video tutorial
Rotator Foot Plate for Poles
Replacing Upper Rotator Knob For Nodal Ninja Ultimate M1
fr - Remplacement de la molette supérieure de la rotule Nodal Ninja Ultimate M1

Advanced Rotators
Nodal Ninja - RD8 + video tutorial
Nodal Ninja - RD16 + video tutorial
Nodal Ninja - RD3L + video tutorial
Rotator Mini

Discontinued
Nodal Ninja SPH-2
Nodal Ninja SPH-1

Fanotec Pole Series
Using Pole Series 1 and the Extension Unit
Using Pole Series 2 Upper and Lower Unit
Tripod Adapter (Type A) for Pole Series 1 and Series 2
Tripod Adapter (Type B) for Pole Series 1 and Series 2

Lens Ring Mounts
Lens Ring Component Build Chart

M1 Ultimate Series
Nodal Ninja Ultimate M1
Nodal Ninja Ultimate M1 - L/S
M1-S Ultimate Series
Nadir Adapter on M1L
fr - Guide d'installation de l'Adapteur Nadir pour Ultimate Modular M1-L

M2 Ultimate Series
Nodal Ninja Ultimate M2 Gimbal Pano Head With Rotator D8II or D16II

NN 180
Nodal Ninja 180 w/RD4 + video tutorial

NN3 Series
Nodal Ninja 3 MKII
Nodal Ninja 3 MKII w/RD3L + video tutorial
Nodal Ninja 3 MKII w/RD8 + video tutorial
Nodal Ninja 3 MKII w/RD12
Nodal Ninja 3 MKII w/RD16 + video tutorial

NN4 Series
Nodal Ninja 4
Nodal Ninja 4 w/RD8
Nodal Ninja 4 w/RD16 + video tutorial

NN5 Series
Nodal Ninja 5 + 5L
Nodal Ninja 5 w/RD8 + video tutorial
Nodal Ninja 5 w/RD12
Nodal Ninja 5 w/RD16 + video tutorial

R1/R10
Nodal Ninja Ultimate R1 - Ring Mount Pano Head
fr - Nodal Ninja Ultimate R1 - Tête pano avec anneau
GTP with R10 (Google Trusted Photographers)
GTP R10 Package for Sigma 8mm f/3.5 for Canon
GTP R10 Package for Sigma 8mm f/3.5 for Nikon
GTP R10 Package for Canon EF 8-15mm
Lens Ring for Sigma 8mm Fisheye Canon Mount
Lens Ring for Sigma 8mm Fisheye Nikon Mount
Lens Ring for Canon EF 8-15mm f/4 L USM
R1 NPP for Sigma 8mm F3.5 Canon and Nikon
R10 NPP for Sigma 8mm F3.5 Canon and Nikon

Only buy from authorized resellers. If buying new from other than an authorized reseller, no warranties or product support are included.

topTop

Line

Nodal Ninja


Exclusive distributors of the Fanotec product line. Fanotec develops and manufactures exclusively products to meet the needs of the panoramic photographer. We offer products such as the award winning Nodal Ninja, the CNC machined Ultimate Line, Carbon Fiber Aerial Poles, Levelers, and many more related accessories. Many of these items may also be used for general photography as well.

Resellers


Check for a reseller in your country.
Resellers

News

Line
Line
NN3 MKII NN4 M1 R1 Poles EZ-Leveler II

Line
STORE    SITEMAP    FORUM
Testimonials | Trade In's | User Guides | Find a Reseller | Affiliates | Terms of Use | Your Account | Contact
Accredited Business Bureau   D-U-N-S Registered   LinkedIn   youtube   twitter   flickr   facebook   
Nodal Ninja®, 3454 N. San Marcos Pl. Ste 9, Chandler, Arizona, 85225 USA Customer Service ph: 480-659-9899 / fax: 480-452-0452 Hours: M-T-TH-F 8am-12pm
© 2013 Nodal Ninja® | Nodal Ninja® is a Registered Trademark - All Rights Reserved.

Verified Merchant   PayPal Verified