One of the 3 adjustable arms to my EZ Leveller is not ďclosingĒ. Itís at its full extension, but the rotating knob, to retract the plates together, thereís no play at all, itís free-wheeling. This has happened quite a lot, but seems to have fixed itself in the past if you applied a little pressure to that side of the top plate when retracting. Not this time, and itís now stuck at full extension. I know this isnít isolated to this one EZ Leveller, as I have 2 and both are now stuck like this. Has anyone else had this problem? Iím away on a cruise ship job for a few days, and have tried to take the leveller apart trying to undo the small hex bolt holding the offending arm together, but it must be fixed in tight as it shredded my allen key! This could not have come at a more inconvenient time!
Iíve got 2 EV Levellers Ė both doing this same problem