So whats the best way to fix this problem, i read somewhere to take a pic straight up, i tried that from the ground diddnt see how that would work..
It depends on what camera you use to take straight up shot (the zenith shot), and when. With a cloudless sky, a shot taken within a few minutes should match well enough to blend with the other shots. If using the same camera, then you would simply add the zenith shot and either assign control points if there are any matching features available or manually position it in the Panorama Editor window. Whether a single shot will cover the hole I don't know. You could take the zenith shot with a different camera/lens, maybe with a wider angle of view if necessary. In that case, you would assign individual lens parameters for that image via the Lens settings tab and the Image Parameters tab. Again, if there are no matching features present for control points to enable the optimizer to align the image, you would need to align it manually. Tilting the camera down a little for the zenith shot might enable features nearer the horizon to be captured and be available for control points while still covering the zenith hole fully.