I use several different small tables to shoot my pics. I bought a board and placed legs below it to get a table. Legs are 30cm long. Place the "table" on top of a normal table. I use my camera on the tripod so I can shoot horizontally or from above. In case I need to shoot an NN panohead, I use 3/8" screw going through a board to fix the panohead. I use several backgrounds to be placed on top of the screw.
You have to cut a hole for 3/8" screw to cut the thread afterwards and then use the thread burr to drill the threads into the board. Then you can screw the bolt through the board to fix the panohead. Use a board that's around 20mm thickness.
Feel free to ask,
Last edited by hindenhaag; 11-06-2013 at 01:55 PM.
Unfortunately this arrangement wouldn't work for my case. I'm shooting for HDR data inside a set, so I can't move to alter the set itself. I'm going to look into mounting the ez leveller to something like these dumbbell plates: http://images.monstermarketplace.com...al-703x754.jpg