Thanx for the fast feedback and replay Heinz.
i will trie your sugested settings. sorry for my nobb questions but the LR setting i do not have the same thin marking line that i have on my UR so do i read the number thats just in front of the base on the LR?
Do you have any sugestion on what would be the best combo for a lense on a fullframe body?
I've checked my database for LRS D3 and it is 89 in place of theoretically 88.
You read LRS just in front of the foot of the vertical rail. The long side of the foot has to be mounted towards the rotator. Just let the marking line inside the rail just be seen in front of the foot.
The normal lens for D3 would be the 16mm/f2.8, it needs 6 shots around + Z +2x N. In case of busy places, stronger winds, lots of traffic I use a shaved 10.5mm/f2.8 for 4 shots around + Z +2x N. This means the lens hood is cut off. Shooting bracketting there will be a difference in time to shoot all the shots. So +2 shots x .... of the bracketting may give you a lot of ghost etc, which means a lot of work on the computer.
Your Samyang lens is tested quite good. Have a look to vrwave to your lens, you find some interesting info and the test in LensTip. Once you are used to it, there should be no problem in using it though it is a manuel lens. Fill in the data in PtGui and store them.
Last edited by hindenhaag; 08-22-2013 at 03:11 AM.