NN5 + Canon 600D + Samyang 8 mm f/3.5
I have a question for you that you are using the parameters set for the head in this configuration. I mean NN5 + Canon 600d + Samyang 8 mm f/3.5
Of course, in this case, the apparatus may be from Canon 350D to 600D are dimensionally similar.
Hi and welcome to the forum.
H + 13mm for the reference point of the vertical rail is LRS = Lower Rail setting: 53
L1 + L2 gives you URS = upper rail setting = 39 + 50 = 89
Test this with the following methods described in the links below:
Set lens parameter to 9mm in PTGui, because the lens is more like a 9mm fisheye. Set "minimize lens distorsion" to lens shift + heavy.
Last edited by hindenhaag; 07-08-2013 at
Thank you for your response
I do not use the PTGui. I'm using Autopano.
Test for a couple of hours these parameters
You can download a trial version to do your testing? Lens parameters should be the same with autopano.
Today I tried to hand for the values and got these results:
LRS = Lower Rail setting: 57
URS = upper rail setting = 94,5
in Autopano RMS 3.74
Thx for letting us know.
Today I made more accurate measurements and got these results:
LRS = Lower Rail setting: 58
URS = upper rail setting = 93,5 +/- 0.5 mm
Tags for this Thread