RS-2 settings with 5D2 & shaved Tokina 10-17 @ 12mm

Welcome to Nodal Ninja Forum

+ Reply to Thread
Results 1 to 5 of 5

Thread: RS-2 settings with 5D2 & shaved Tokina 10-17 @ 12mm

Share/Bookmark
  1. RS-2 settings with 5D2 & shaved Tokina 10-17 @ 12mm

    #1

    as per title, anyone nailed the upper & lower rail settings for 5D2 & shaved Tokina 10-17 @ 12mm for either the RS-1 or RS-2...?

    thanks

    Stu
  2. #2
  3. #3

    This particular combination is perhaps not very common. However, since there is only one adjustment possible, it shouldn't take more than 5-10 minutes or so to determine the settings yourself. There's probably very little change in the settings over the lower range of focal lengths. See http://www.johnhpanos.com/epcalib.htm .

    John
  4. #4

    Quote Originally Posted by John Houghton View Post
    However, since there is only one adjustment possible...
    Oops - sorry, I had in mind the R1. The RS-1 of course has the lower rail adjustment too. It still won't take longer than 15min to set up.

    John
  5. #5
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,733

    Hi Stu,

    Here's a way to get to know about you LRS settings:

    http://www.nodalninja.com/forum/show...d-LRS-for-RS-1

    For RS-2 you have to add 4mm instead of RS-1 because of different vertical rails and rotator measurements. H remains the same , depends on the lens ring you use.

    Heinz.
    Last edited by hindenhaag; 10-09-2013 at 07:52 AM.
+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts