Tripod Adapter - Typ A oder B ?

Welcome to Nodal Ninja Forum

+ Reply to Thread
Results 1 to 9 of 9

Thread: Tripod Adapter - Typ A oder B ?

Share/Bookmark
  1. Tripod Adapter - Typ A oder B ?

    #1

    Hello!

    which Adapter is betther for holding the Pole with cam?

    I have now Typ A, and its difficult to find a tripod with a strong3/8 screw thread at the bottom of the center pillar (hope its right translated).

    What would you recommand?



    Regards
  2. #2

    Here in France I sell to my customers the Benro A or C series (Aluminium or Carbon) that all have a 3/8 screw thread at bottom of central column and so you can use Tripod Adapter type A easily :) If you don't find them, you can always use Type B (just be careful to measure correctly diameter of central column so you can order the adapter with correct adapter for your column !



    French Nodal Ninja Distributor
    Blog: http://www.skivr.com
    Online shop: http://magasin.skivr.com
    Photo gallery: http://flickr.com/skivr
    Support website: http://support.skivr.com
  3. #3

    hi! thanks for your answer.

    Iam now confused.. what typ I should use. Anyway, I ve to buy a new tripod. the diameter of central column of my very old manfrotto is too small.

    So, should I by a thicker one for type B or a Benro A or C with 3/8 screw in? Which kind of mount is stronger in general for holding the pole + cam?
  4. #4
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,741

    Hi,

    You can use the manfrotto series as well. New 290 Series or 055 Series will work for example. Replace the rubber cap at the end of center column with the adapter with the 3/8" inside or use the center column itself. Actually it does not matter what type you use. Both methods are safe.

    Heinz
  5. #5
    Users Country Flag
    Join Date: Apr 2008
    Location: Hong Kong
    Posts: 2,434

    Quote Originally Posted by dueserr View Post
    hi! thanks for your answer.

    Iam now confused.. what typ I should use. Anyway, I ve to buy a new tripod. the diameter of central column of my very old manfrotto is too small.

    So, should I by a thicker one for type B or a Benro A or C with 3/8 screw in? Which kind of mount is stronger in general for holding the pole + cam?
    The weight of Pole 2 and rig above is below 5kg. Any reasonable tripod should able support its vertical loading without breaking. It is stability/ steadiness of pole that matters. So stronger the tripod, the better.

    Nick



    Fanotec
    We listen. We try harder.
  6. #6

    Hi!

    which one you would recommend?
  7. #7
    Users Country Flag
    Join Date: Apr 2008
    Location: Hong Kong
    Posts: 2,434

    if your tripod has 3/8" sockets at the base of center column, get type A. Otherwise B.

    Nick



    Fanotec
    We listen. We try harder.
  8. #8

    I want to by a new tripod. Which one you would recommand?
  9. #9
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,741

    Have a look at Manfrotto 055XProB.
    It is a bit heavier but I use this with the Tripod Adapter. You should get tripod Adapter Type B 28mm in this case.
    It is high enough to have a good look through the viewfinder.

    http://www.cameranu.nl/nl/statieven-...h283_1180_7677
    http://www.cameranu.nl/nl/statieven-...4_28684_260184

    Cameranu.nl verschickt uebrigens kostenfrei nach Deutschland.
    Ist top dealer fuer Nodal Ninja mit dem groessten Lagervorrat. Schau unter "stativen en toebehoren". Gehe zu "Nodal Ninja" fuer Panoheads und zu "Fanotec" fuer Poles und Zubehoer.

    Heinz
    Last edited by hindenhaag; 09-09-2013 at 07:59 AM.
+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts