RD16 and that extra bolt
Results 1 to 4 of 4

Thread: RD16 and that extra bolt

Share/Bookmark
  1. RD16 and that extra bolt

    #1

    I love my new RD16 head, but where should i put the second bolt?

    I need 6 shots around, and when I insert the bolt in the holes to the left of the lock bolt the incremental steps are getting very small.
    Where do you put it. Or do you cut it off.
    Is there a manual for this thing - I cannot find it on the site.

    Regards
    Jesper
  2. #2
    Users Country Flag
    Join Date: Apr 2008
    Location: Hong Kong
    Posts: 2,476

    you can just let it hang around or place it in the socket that your may switch to use. keep it loose enough so that it won't interfere.

    Nick



    Fanotec
    We listen. We try harder.
  3. #3

    I placed mine in the backside of the tension bolt. Mine arrived today and I was wondering the same thing. Does your tension bolt (large of the three) have threads?
  4. #4
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,741

    Hi Jesper,

    I believe you have put it too far in. When you get smaller increments stops, you are using the x/2 versions of the stops. I use my bolt in the left side of the locking knob screwed in a little bit so that it does not work for the smaller increments. Just give it a try, it will work.

    Kind Regards,
    Heinz
    Last edited by hindenhaag; 04-19-2014 at 07:52 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •