rotator mini 4 stops

Welcome to Nodal Ninja Forum

+ Reply to Thread
Results 1 to 2 of 2

Thread: rotator mini 4 stops

Share/Bookmark

Hybrid View

  1. rotator mini 4 stops

    #1

    Hi, I wonder you wonderful people at ninja are going to make a rotator mini with four stops only? My set up with pole and R10 80% of the time requires four stops.

    Cheers
  2. #2
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,740

    Hi,

    You can get rotator mini replacement rings to change the number of stops in case you need to change them. Buy the rotator with your favorite number of stops and in case you like to change number of stops just buy a second ring.

    http://shop.nodalninja.com/rotator-m...lacement-ring/

    Click image for larger version

Name:	DSC_4688.jpg
Views:	82
Size:	72.3 KB
ID:	784

    To change the ring place the rotator between thumb at bottom and two fingers on top on the ring. Then open the two hex screws 180° opposite and take off the ring. Place the new ring on top, press it down against the rotator body - spring loaded click ball below the ring - and fix the screws.

    Heinz
    Last edited by hindenhaag; 02-01-2013 at 10:01 PM.
+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts