Arca-Swiss model and NN3 MKII Plate?
Results 1 to 5 of 5

Thread: Arca-Swiss model and NN3 MKII Plate?

Share/Bookmark

Hybrid View

  1. Arca-Swiss model and NN3 MKII Plate?

    #1

    I'm looking at various tripod options from these two Benro styles:
    http://www.benrousa.com/products_details_A2691TB1#specs
    http://www.benrousa.com/products_details_A1350Q1R#specs

    One uses an Arca-Swiss style plate PU60 and the other a PU50.
    Which size plate came with the NN3?

    I'd like to keep the plate which came with the NN3 MKII on the camera, even when not using the NN3 itself.
    Last edited by Tiziano; 11-18-2012 at 09:28 PM.
  2. #2
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,741

    Sorry to say,

    NN3 MKII comes with a CP-2 Plate, which is not an arca style clamp system.

    http://store.nodalninja.com/index.ph...plate-cp2.html

    Heinz
    Last edited by hindenhaag; 11-18-2012 at 10:17 PM.
  3. #3

    Foiled again!
    Thanks Heinz.
  4. #4
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,741

    Not totally!

    Found an option for you: http://www.tripodhead.com/products/camera-body-main.cfm

    Just checked my P-5 plate for you. You just have to set some groves in the plate from the back. 2.5X2.5 mm, outside distance is 35mm, 17,5mm from the center scew. Then you can slide the upper rail's rims into the clamp and fix it with the upper rail knob.

    Click image for larger version. 

Name:	Wimberley P-5 Arca-Style camera plate - Statieven & Toebehoren bij CameraNU.nl.jpg 
Views:	160 
Size:	37.7 KB 
ID:	724

    You could leave this plate on your camera and use it without problems on the upper rail as well as on your ballhead/tripod.

    To be sure just measure your rims in width and height on your NN3. Inside is not rectangular. Just added some groves to my plate and it works. The thread of the upper rail knob is a bit too long, add some metal washers below the knob or shorten the thread. I'll send pics tomorrow.

    Be aware the clamp of ballhead/tripod really is an Arca Style Clamp.

    Heinz
    Last edited by hindenhaag; 11-19-2012 at 09:47 AM.
  5. #5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •