Canon, Sigm 8mm, 4 shots at 7.5degrees...
Results 1 to 6 of 6

Thread: Canon, Sigm 8mm, 4 shots at 7.5degrees...

Share/Bookmark
  1. Canon, Sigm 8mm, 4 shots at 7.5degrees...

    #1

    Hi All

    According to the manual the Nodal Ninja R10 with a Canon APS-C needs a NPP setting of 1.65. *I've had a look at calibrating the NPP manually and it seems to be 0.85 (Canon 600D with Sigma 8mm 3.5) - does anyone else have this combination? What setting do you use?

    Thanks

    Roy
  2. #2
    Users Country Flag
    Join Date: Apr 2008
    Location: Hong Kong
    Posts: 2,452

    I think 1.65 was suggested for R1.
    Yes, I can confirm 0.85 setting for R10 7.5 deg and Sigma 8mm F3.5 for Canon.


    Nick



    Fanotec
    We listen. We try harder.
  3. All documentation states R1 and R10 are the same??

    #3

    Thanks for the updated info but it would be good if you could update your website please as I have wasted hours checking and double checking the documentation all over and it all states the same - everything all over your site states that 1.65 settings are correct for the R1 and R10 with an 8mm Sigma and Canon

    see also http://www.nodalninja.com/qr/r1-r10/...ltimate-r1/17/

    Regards

    Roy
  4. #4
    Users Country Flag
    Join Date: Apr 2008
    Location: Hong Kong
    Posts: 2,452

    Hi Roy,

    Thx for the feedback. We will update that. I am also creating/ revising the documentations of the lens ring and R1/10 system.

    Nick



    Fanotec
    We listen. We try harder.
  5. Levelling?

    #5

    Hi again, and thanks for the reply.

    Could I ask another question which is baffling me ....

    I'm using an R10 with mini rotator and bubble level. When I set the R10 perfectly level and move it 90degrees the level is out again. I've stripped down the R10 to ensure the bubble is level and fitted correctly and it is placed on my tripod perfectly square. Is this normal? Do you ever get problems with the bubble levels?

    Thanks

    Roy
  6. #6
    Users Country Flag
    Join Date: Apr 2008
    Location: Hong Kong
    Posts: 2,452

    Quote Originally Posted by roymoody View Post
    Hi again, and thanks for the reply.

    Could I ask another question which is baffling me ....

    I'm using an R10 with mini rotator and bubble level. When I set the R10 perfectly level and move it 90degrees the level is out again. I've stripped down the R10 to ensure the bubble is level and fitted correctly and it is placed on my tripod perfectly square. Is this normal? Do you ever get problems with the bubble levels?

    Thanks

    Roy
    read the 2nd page on this guide.
    http://www.panoguide.com/r/?p=http%3...ler%2520II.pdf



    Fanotec
    We listen. We try harder.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •