You can use the new Fanotec Camera Plates on NN4, NN5!!
Results 1 to 3 of 3

Thread: You can use the new Fanotec Camera Plates on NN4, NN5!!

Share/Bookmark

Hybrid View

  1. You can use the new Fanotec Camera Plates on NN4, NN5!!

    #1
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,741
    Thumbs up

    Hi,

    I just tested that the new Fanotec Camera Plates with Automatic Centered Click Design can be used for NN4 and NN5 as well. What do you need:

    QR40A : http://store.nodalninja.com/products...pper-Rail.html

    One of the new Fanotec Camera Plates originally designed for M1 Series: http://store.nodalninja.com/categori...s-Accessories/

    And the CP-2 Camera Plate that came with your panohead.

    http://www.nodalninja.com/forum/show...6608#post36608

    http://www.nodalninja.com/forum/show...es-CP-U2-U3-U4

    The System will add 20mm to your lower rail setting.

    Check with your own equipment. : http://www.easypano.com/forum/displa...1&TopicID=4162

    Cheers,
    Heinz
    Last edited by hindenhaag; 03-07-2012 at 01:47 PM.
  2. #2

    Quote Originally Posted by hindenhaag View Post
    The System will add 20mm to your lower rail setting.
    The upper rail setting may also be affected. The 5DII plate has the mounting screw offset from the centre by around 3.5mm, so it's not in line with the mounting screw of the QR40A clamp.
    .
    John
  3. #3
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,741

    Hi John,


    Thx for your info about the canon camera plates.

    To get it safe we should say once the System is installed, everybody should re check the Upper and Lower Rail Settings with the own equipment.

    http://www.easypano.com/forum/displa...1&TopicID=4162

    http://www.johnhpanos.com/epcalib.htm

    Heinz

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •