Add-On to Installation guide M1-L/ Nadir Adapter

[hindenhaag]

Hi,

cause there have been questions on other forums, I have taken some pics to try to set some things more clear.

My rails and QRC are Pre-production ones. Compare the red numbers with the NN User Guide.



http://www.nodalninja.com/Manuals/M1...lation_QRG.pdf

http://www.nodalninja.com/Manuals/M1...lation_QRG.pdf

http://www.nodalninja.com/Manuals/QR...apter_M1-L.pdf

Regards,
Heinz

BTW: I placed a 350 gr 10 cm circle cut paper with cut out 7mm center for screw and the two anti twist screws - 6mm - to use it as reference to check LRS = Lower rail Setting
http://www.easypano.com/forum/displa...1&TopicID=4162

I turned the QRC 55 lower rail clamp around with the knob showing to me to get a free view for LRS Test.

[Vincèn]

Thanks for sharing all these pictures :)

[hindenhaag]

Hi Vincen,

Pleasure, you may use them if you like for your website.

Are the definite M1 panoheads pre installed or do they come in bits and peaces like the pre production line? Then I will take some add-ons.

Heinz

[Vincèn]

Pleasure, you may use them if you like for your website.

Are the definite M1 panoheads pre installed or do they come in bits and peaces like the pre production line? Then I will take some add-ons.

Well they are supposed to be also with a case but not sure yet about status of case, maybe Nick may clarify about it ?

Vincèn

[Bill Bailey]

Well they are supposed to be also with a case but not sure yet about status of case, maybe Nick may clarify about it ?
Vincèn

Cases are coming very soon and are quite impressive - very strong and durable. The M1 will come is 3 base pieces - lower assembly vertical assembly and upper assembly. It's merely a matter of putting the primary components together as with NN3' and 4's.
Bill

[Bill Bailey]

Hi,
cause there have been questions on other forums, I have taken some pics to try to set some things more clear.
My rails and QRC are Pre-production ones. Compare the red numbers with the NN User Guide.
http://www.nodalninja.com/Manuals/M1...lation_QRG.pdf
http://www.nodalninja.com/Manuals/M1...lation_QRG.pdf
http://www.nodalninja.com/Manuals/QR...apter_M1-L.pdf

Regards,
Heinz

BTW: I placed a 350 gr 10 cm circle cut paper with cut out 7mm center for screw and the two anti twist screws - 6mm - to use it as reference to check LRS = Lower rail Setting
http://www.easypano.com/forum/displa...1&TopicID=4162

I turned the QRC 55 lower rail clamp around with the knob showing to me to get a free view for LRS Test.

Hey Heinz,
All the work you do in support of our product is greatly appreciated not only here but in other forums as well. And this is especially true with the M1. You must have been a support tech in previous life

I know we've said it before but we are also nearing completion of proper manual for M1. We've already completed updates for the 3 and 4 and the M1 is next.

thx again for providing the public your valued input - you are true Ninja

Bill

[Vincèn]

Cases are coming very soon and are quite impressive - very strong and durable. The M1 will come is 3 base pieces - lower assembly vertical assembly and upper assembly. It's merely a matter of putting the primary components together as with NN3' and 4's.

[hindenhaag]

Hi Bill,

thx for your kind words. It is a pleasure for me to do it.

Yes, I am a true Ninja because of the products quality since years and companies support to their customers. And a great forum.

Kind Regards,
Heinz

[Vincèn]

Yes, I am a true Ninja because of the products quality since years and companies support to their customers. And a great forum.

Hope we get a chance to meet you at next Photokina (and no excuse please , you still have one year to organise

Vincèn