D700+Sigma 8/3,5+NN3 mk2

Welcome to Nodal Ninja Forum

+ Reply to Thread
Results 1 to 5 of 5

Thread: D700+Sigma 8/3,5+NN3 mk2

Share/Bookmark
  1. D700+Sigma 8/3,5+NN3 mk2

    #1

    Hello there,
    does anyone know,exact settings for NN3 CP-1+sigma 8mm/3,5 + nikon D700? I've changed my D300 for D700 and i can't figure out the correct nodal point for this setup!!:(((

    Thank you for any help,
    Regards
    Martin
  2. #2
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,740

    Hi Martin,
    And welcome to the forum.

    Check 94 for URS = Upper Rail setting.

    Check 62 for Lower Rail

    http://www.johnhpanos.com/epcalib.htm

    http://www.easypano.com/forum/displa...1&TopicID=4162

    I did not test D700 on NN3 MKII. Only on NN5, M1-L. Changing from NN5 to NN3 adds 1mm in LRS. You always have to check settings with your own equipment. Is it NN3 MKII or an older model?

    Regards and sucess,
    feel free to ask,
    Heinz
    Last edited by hindenhaag; 10-19-2011 at 09:26 AM.
  3. #3
    Users Country Flag badders's Avatar
    Join Date: Jan 2009
    Location: East Kilbride, Scotland
    Posts: 349

    Do you have the links to the standard methods for determining the NPP yourself? Should take only about 5-10 mins max.



    Badders
  4. #4

    Hi Heinz!
    Thank you for your help,after i used the settings everything is fine.You hel me very much with my problem! (I have NN3 MKII).

    Regards
    Marcin
  5. #5
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,740

    Pleasure and have fun with your equipment.


    Regards,
    Heinz
+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts