Hi Demon,

your problems seem to be solved:

Click image for larger version

Name:	DSC_3426.jpg
Views:	286
Size:	183.9 KB
ID:	327Click image for larger version

Name:	DSC_3428.jpg
Views:	309
Size:	169.5 KB
ID:	328Click image for larger version

Name:	DSC_3430.jpg
Views:	291
Size:	182.3 KB
ID:	329Click image for larger version

Name:	DSC_3432.jpg
Views:	287
Size:	234.4 KB
ID:	330Click image for larger version

Name:	DSC_3432.JPG.jpg
Views:	293
Size:	143.2 KB
ID:	331

The plates stand out 0.65", 16mm. This is done to use full length of the base plate for the upper rail and keep the thin plate moveable to adapt it to your own camera, same as normal CP-2 plate principle.

The top plate touches the camera bodies front by cutting out the lens circle and a corner for the outstanding button.

If you like it, IM your address and I can send it on friday. For nothing to get you out of frustration. May be you could send your CP-2 in reverse to me.

If you like changes, I can try to fit it.

Cheers,
Heinz

BTW: Body arrived at 5.30 pm, now it is nearly 8pm.