I've looked at some of the tutorials and I think I get the concept on how to figure it out. I'm rather time crunched however and so I was hoping someone already had the settings. I also figured that since I bought it as a kit from Nodal Ninja that the settings would already be listed, but I couldn't find them on the web page.
If no end user has the settings for you then you can easily get them yourself in around 10 mins max using the tutorials. It's impossible for Nodal Ninja to test and list every single camera/lens combo so they rely on end users finding the settings and offering them up for publication.
cmoran, Use the settings listed for the Canon 350D on the NN web site. They may be 1mm or so different from the 500D settings but should be quite good enough for you to start with. As Badders points out, it only takes around 10 minutes to determine the correct settings yourself and they should be as good as or better than any settings you might get from somebody else.
Differences between the 350D and 500D can be found in the Entrance Pupil Database on the PanoTools wiki at http://wiki.panotools.org/Entrance_Pupil_Database .