NN3 with R1/R10 Lens ring

Welcome to Nodal Ninja Forum

+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 16 to 17 of 17

Thread: NN3 with R1/R10 Lens ring

Share/Bookmark
  1. #16
    Users Country Flag
    Join Date: Sep 2009
    Location: Los Angeles, CA
    Posts: 343

    Here is another option:

    Bolt the R10 clamp onto a T adapter (two bolts). Bolt the T adapter onto the upper arm (maybe two bolts). Slide it all the way forward and attach your lens ring adapter. Simple, cheap, uses existing parts (ok, you will need some metric nuts for the two bolts used to attach the clamp to the T adapter).

    With a very small modification to the T adapter, it could work. Instead of the slot, put two tapped holes.
  2. #17

    Quote Originally Posted by DennisS View Post
    Here is another option:

    Bolt the R10 clamp onto a T adapter (two bolts). Bolt the T adapter onto the upper arm (maybe two bolts). Slide it all the way forward and attach your lens ring adapter. Simple, cheap, uses existing parts (ok, you will need some metric nuts for the two bolts used to attach the clamp to the T adapter).

    With a very small modification to the T adapter, it could work. Instead of the slot, put two tapped holes.
    That would work! The old T-20 or T-30 sets the arm attach point a good ways back on the upper arm. And it's modular :-)
+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts