Another suggestion for T-II

Welcome to Nodal Ninja Forum

+ Reply to Thread
Results 1 to 2 of 2

Thread: Another suggestion for T-II

Share/Bookmark
  1. Another suggestion for T-II

    #1

    The little locking device that holds the tripod screw in place is a little square metal plate with protruding edges on two sides that slide along the tripod screw track and engage the T-II when the locking screw is tightened.

    I have noticed that sometimes that little square plate can turn 90 degrees putting the protruding edges in a position where they cannot engage the T-II. In this position, it will sit in the grove at an angle and prevent the camera from seating properly onto the T-II.

    I suggest either putting the protruding edges on all four sides so that if it does accidentally rotate 90 degrees it will still engage properly or making the little square plate rectangular so it can't twist at all.
  2. #2
    Users Country Flag
    Join Date: Apr 2008
    Location: Hong Kong
    Posts: 2,387

    thx for the suggestion.

    nick



    Fanotec
    We listen. We try harder.
+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts