Coming Soon: Zenith / Nadir Adapter for Nodal Ninja Ultimate R1 and R10

Welcome to Nodal Ninja Forum

+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 16 to 23 of 23

Thread: Coming Soon: Zenith / Nadir Adapter for Nodal Ninja Ultimate R1 and R10

Share/Bookmark
  1. #16
    Users Country Flag
    Join Date: Oct 2009
    Location: Sitges, Spain
    Posts: 38

    perfecto!!!!
    gracias

    neil
  2. #17
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,740

    Hi Nick,

    I played around with quick mount mini. I am referring to your picture with the Quick Mount Mini and adapter on top of pole without rotator. The easiest way for me to change Nadir Zenith position would be to turn the camera around the quick mount mini plate. This would be quicker for me than to take off the lens ring and turn the camera around. My question: to get the quick mount mini in a fixed position + - 90°, you could use the B1 holes at the bottom of the clamp. Can you add a feathered ball klick screw which uses the B1 holes to klick in and give a fixed +- 90° position? And add a white mark on the outside of the quick mount mini clamp which corresponds to a mark on the new adaptor to have a visible sign besides the klick? I do not know wether there is room enough to add the klick ball screw.

    Just some thoughts to try to make it easy to change from Nadir to Zenith without taking the system apart but just loosen the quick mount mini screw a little bit?

    http://www.ganter-griff.de/?cmd=norm...1031&pageID=14

    Cheers,
    Heinz
    Last edited by hindenhaag; 01-13-2011 at 11:05 PM.
  3. #18

    Join Date: Feb 2010
    Location: Chongqing,China
    Posts: 7

    太棒了 希望尽快能买到


    --------------------------------------------------
    Nick's Chinese to English Translation:

    "Oh, great! I hope to buy it soon."

    :-)

    Nick

    PS although the forum support multi-languages, it is best to keep the discussion in English only.
    Last edited by nick fan; 01-14-2011 at 07:16 AM.
  4. #19
    Users Country Flag
    Join Date: Apr 2008
    Location: Hong Kong
    Posts: 2,388

    Quote Originally Posted by hindenhaag View Post
    Hi Nick,

    I played around with quick mount mini. I am referring to your picture with the Quick Mount Mini and adapter on top of pole without rotator. The easiest way for me to change Nadir Zenith position would be to turn the camera around the quick mount mini plate. This would be quicker for me than to take off the lens ring and turn the camera around. My question: to get the quick mount mini in a fixed position + - 90°, you could use the B1 holes at the bottom of the clamp. Can you add a feathered ball klick screw which uses the B1 holes to klick in and give a fixed +- 90° position? And add a white mark on the outside of the quick mount mini clamp which corresponds to a mark on the new adaptor to have a visible sign besides the klick? I do not know wether there is room enough to add the klick ball screw.

    Just some thoughts to try to make it easy to change from Nadir to Zenith without taking the system apart but just loosen the quick mount mini screw a little bit?

    http://www.ganter-griff.de/?cmd=norm...1031&pageID=14

    Cheers,
    Heinz
    The screws at the base of QM mini is for anti-twisting purpose. A click ball will not be strong enough for this purpose. The adapter plate can unwind itself and camera can fall.
    Besides, with many precise sockets and holes for alignment with different NNs, cost of QM mini is quite high already. Adding click ball will make further complication.
    I can try to shorten the head of the anti-twisting screws so that you won't need to fully unscrew the tighten knob of QM mini adapter.

    Nick
    Last edited by nick fan; 01-14-2011 at 07:18 AM.



    Fanotec
    We listen. We try harder.
  5. #20
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,740

    Hi Nick,

    Thx for reply,

    Heinz
  6. #21
  7. #22

    Quote Originally Posted by Mr_Q8ty View Post
    any update on release date ?
    very soon now :D



    French Nodal Ninja Distributor
    Blog: http://www.skivr.com
    Online shop: http://magasin.skivr.com
    Photo gallery: http://flickr.com/skivr
    Support website: http://support.skivr.com
  8. #23

    I hope... I am waiting for

    kok
+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts