D3s +16-35

Welcome to Nodal Ninja Forum

+ Reply to Thread
Results 1 to 5 of 5

Thread: D3s +16-35

Share/Bookmark
  1. D3s +16-35

    #1
    Talking

    Hello guys,

    Bit of a wet weekend so spent it trying to determine the nodal point for a D3s plus the new Nikon 16-35 f4 VRII combination and came up with the following:

    A = 86
    B @ 16 = 130
    B @ 20 = 125
    B @ 24 = 122
    B @ 28 = 122
    B @ 35 = 125

    All dimensions in millimeters.

    Hopefully my technique is OK, but if anyone has any thoughts (I used the 'maintain the space between two points at a certain distance' method), please advise or even delete if way off.

    Thanks in advance...
    Last edited by Makiru; 11-22-2010 at 05:47 AM.
  2. #2

    Gents,

    Took a series of panoramas using my 14-24, 24-70 and particularly the 16-35 and can confirm that the settings that I found for the 16-35 worked very well. I would post, but the process seems a tad complex.

    Regards...
  3. #3
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,741

    Thx for sharing.

    Did you test your LRS with hacksaw method?

    http://www.easypano.com/forum/displa...1&TopicID=4162

    Regards,
    Heinz
  4. #4

    Hello Heinz,

    To be honest, no I didn't. I've bookmarked the link and will definately give it a go just to confirm when I have a spare moment. Anything that dots the 'i' and crosses the 't' as it were can't be bad. Thanks for the heads-up and the link...
  5. More Help 16-35 please

    #5

    Good info for a newbie like me. Regarding your measurements, at 16mm the 130mm is the distance from the film (sensor) plane to the nodal point on the lens, correct? For me this looks to fall about the middle of the manual focus ring, right?

    Thanks,
    Randy
+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts