Canon EF 14mm f2.8L II USM

Welcome to Nodal Ninja Forum

+ Reply to Thread
Results 1 to 5 of 5

Thread: Canon EF 14mm f2.8L II USM

Share/Bookmark
  1. Canon EF 14mm f2.8L II USM

    #1

    Hello all :)

    I have the Canon EF 14mm f2.8L II USM w/ Canon T2i and the Nodal Ninja 5 with EZ Leveller, R16 and just trying to figure the settings for upper and lower arm.
    Anybody with experience with this setup?

    Thanks!
  2. #2

    That's a rather expensive lens, so the lack of responses is perhaps to be expected. You can work out the settings yourself quite easily: see http://www.johnhpanos.com/epcalib.htm.

    John
  3. #3

    Quote Originally Posted by John Houghton View Post
    That's a rather expensive lens, so the lack of responses is perhaps to be expected. You can work out the settings yourself quite easily: see http://www.johnhpanos.com/epcalib.htm.

    John
    ok.. thanks!
  4. #4
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,733

    Quote Originally Posted by vibes35 View Post
    Hello all :)

    I have the Canon EF 14mm f2.8L II USM w/ Canon T2i and the Nodal Ninja 5 with EZ Leveller, R16 and just trying to figure the settings for upper and lower arm.
    Anybody with experience with this setup?

    Thanks!
    Hi Vibes,

    for lower rail setting have a look to http://wiki.panotools.org/Entrance_Pupil_Database and measure
    ( H ) For my personal equipment NN5 I add 13mm to this. H + 13mm = Lower rail setting.

    Test this setting with this: http://www.easypano.com/forum/displa...1&TopicID=4162

    Concerning the URS might be a tip to begin at or near the red ring. Many lenses have the NPP at or near the golden ring.

    Sucess

    Heinz
  5. #5

    Excellent- thank you! I will give that a shot
+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts