Canon EF 14mm f2.8L II USM

[vibes35]

Hello all :)

I have the Canon EF 14mm f2.8L II USM w/ Canon T2i and the Nodal Ninja 5 with EZ Leveller, R16 and just trying to figure the settings for upper and lower arm.
Anybody with experience with this setup?

Thanks!

[John Houghton]

That's a rather expensive lens, so the lack of responses is perhaps to be expected. You can work out the settings yourself quite easily: see http://www.johnhpanos.com/epcalib.htm.

John

[vibes35]

That's a rather expensive lens, so the lack of responses is perhaps to be expected. You can work out the settings yourself quite easily: see http://www.johnhpanos.com/epcalib.htm.

John

ok.. thanks!

[hindenhaag]

Hello all :)

I have the Canon EF 14mm f2.8L II USM w/ Canon T2i and the Nodal Ninja 5 with EZ Leveller, R16 and just trying to figure the settings for upper and lower arm.
Anybody with experience with this setup?

Thanks!

Hi Vibes,

for lower rail setting have a look to http://wiki.panotools.org/Entrance_Pupil_Database and measure
( H ) For my personal equipment NN5 I add 13mm to this. H + 13mm = Lower rail setting.

Test this setting with this: http://www.easypano.com/forum/displa...1&TopicID=4162

Concerning the URS might be a tip to begin at or near the red ring. Many lenses have the NPP at or near the golden ring.

Sucess

Heinz

[vibes35]

Excellent- thank you! I will give that a shot