NN5L and T1i settings?

Welcome to Nodal Ninja Forum

+ Reply to Thread
Results 1 to 4 of 4

Thread: NN5L and T1i settings?

Share/Bookmark

Hybrid View

  1. NN5L and T1i settings?

    #1

    Does anyone have the setting for the nodal point using a NN5L, t1i and 18mm (kit) lens, so I have somewhere to start?
  2. Re: NN5L and T1i settings?

    #2

    Quote Originally Posted by rskern View Post
    Does anyone have the setting for the nodal point using a NN5L, t1i and 18mm (kit) lens, so I have somewhere to start?
    I have found the bottom rail (11.5), as I could focus straight down on the nodal ninja icon.
  3. Re: NN5L and T1i settings?

    #3
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,740

    Check your lower rail setting with this method: http://www.easypano.com/forum/displa...1&TopicID=4162

    Imagine a blade of a circle saw. The short side of the teeth cut. Move to side where the "blade" show the short side = cutting side of the tooth.

    Heinz
  4. Re: NN5L and T1i settings?

    #4
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,740

    You can find your settings in this database : http://wiki.panotools.org/Entrance_Pupil_Database.

    For lower rail setting add 13mm to (H) for NN5, this is tested with my equipment. Might be 11-13mm.

    For upper rail setting add (L1) and (L2) to get the setting at different zoom settings.

    Check your personal combination, it might be different because a lot of reasons.

    http://www.johnhpanos.com/epcalib.htm

    Heinz
+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts