Lower rail settings with NN3

Welcome to Nodal Ninja Forum

+ Reply to Thread
Results 1 to 3 of 3

Thread: Lower rail settings with NN3

Share/Bookmark
  1. Lower rail settings with NN3

    #1
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,733

    Hi guys,

    Could please somebody of you with an NN3 measure the distance of the CP to the lower rail setting as i did with the NN5. I have chosen to set the cp-2 vertical to 60mm on the lower rail and the reading of the vertical rail is 73=13mm.

    This means that we have to add 13 mm to (H) of the camera body in the data base wiki.panotools.org/Entrance_pupil_database for a lower rail setting with an NN5.

    I suppose the distance is less with an NN3.

    Thx in advance

    Heinz
  2. Re: Lower rail settings with NN3

    #2
    Users Country Flag
    Join Date: Aug 2008
    Location: Netherlands
    Posts: 1,733

    Now the photo:

    Heinz
  3. Re: Lower rail settings with NN3

    #3

    Hello Heinz,

    Are these the dimensions you are looking for?

    Best regards, Hugh.
+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts