Someday a SuperUltimate NodalNinja pano head
Results 1 to 2 of 2

Thread: Someday a SuperUltimate NodalNinja pano head

Share/Bookmark
  1. Someday a SuperUltimate NodalNinja pano head

    #1

    It will have vernier screws for all adjustments rather than the slide and tighten adjustments that are used now.

    It's hard to do precise adjustments with the current set up. there's a small amount of twist in all three axises of each adjustment and loosening -- sliding -- tightening procedure can be very frustrating.

    It won't be cheap but the pro's will like it -- I think

    But this is just my opinion...
  2. Re: Someday a SuperUltimate NodalNinja pano head

    #2
    Users Country Flag
    Join Date: Apr 2008
    Location: Hong Kong
    Posts: 2,476

    Quote Originally Posted by DemonDuck View Post
    It will have vernier screws for all adjustments rather than the slide and tighten adjustments that are used now.

    It's hard to do precise adjustments with the current set up. there's a small amount of twist in all three axises of each adjustment and loosening -- sliding -- tightening procedure can be very frustrating.

    It won't be cheap but the pro's will like it -- I think

    But this is just my opinion...
    you should not need more than 0.5mm accuracy in the NPP settings. Most of time, 1mm is more than enough.

    Nick



    Fanotec
    We listen. We try harder.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •