Problem with T20: Screw of rail is too long
Results 1 to 4 of 4

Thread: Problem with T20: Screw of rail is too long

Share/Bookmark
  1. Problem with T20: Screw of rail is too long

    #1

    Hi there,

    I have a new T20 for use with longer lenses on my NN5. But it looks like the screw of the mounting rail is either too long or the holes in the T20 are a bit too short. It is not possible to tighten the adapter, there is still a little bit of space, even when tightening the screw very heavy.

    Do I need another rail?
    Is that a known problem?
    Can I just shorten the screw 1 mm?

    Any help is highly appreciated.

    Best regards from Hamburg
    Patrick
  2. Re: Problem with T20: Screw of rail is too long

    #2

    Hi Patrick,

    please contact us at cs [at] nodalninja [dot] com with information about your order and details about the equipment used: we could send a replacement part easily!

    Cheers,
    Mauro



    Mauro Contrafatto
    Customer Service Manager
    cs@nodalninja.com
  3. Re: Problem with T20: Screw of rail is too long

    #3

    Hi Mauro,

    I'm already in contact with my german reseller. If he can't help I will contact you directly.

    Thank you
    Patrick
  4. Re: Problem with T20: Screw of rail is too long

    #4

    Hi,

    I have just taken delivery of an NN5 and T-20 Adapter in the UK. I am also having this issue that I cannot tighten the T-20 adapter into the top rail so that it fits tightly. Again it seems that the hole for the screw is perhaps not long enough.

    Any Suggestions? I would be interested how the original poster resolved the problem.

    Paul.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •