Impossible to see the bubble level when the head is at eye level...

[DemonDuck]

Remember the thread where we talked about the difficulty of seeing the bubble level on a head (NN3/5)?

Well I stumbled across this ---

http://www.eichhorn-gme.com/Products...55fec3bc4ef2c1

http://www.eichhorn-gme.com/images/1055.jpg

[bigwade]

Use a little mirror.
In the old days I used a Sinar Handy camera, it had a little door with a plastic round mirror.
From all positions the bubble was visible.
grtz
Frank

[Terrywoodenpic]

Remember the thread where we talked about the difficulty of seeing the bubble level on a head (NN3/5)?

Well I stumbled across this ---

http://www.eichhorn-gme.com/Products...55fec3bc4ef2c1

http://www.eichhorn-gme.com/images/1055.jpg

Looks a nice gadget but it is about a 2 inch cube. If it were a 1 inch cube it might be more suitable... a dental mirror works fine

[DemonDuck]

Looks a nice gadget but it is about a 2 inch cube. If it were a 1 inch cube it might be more suitable... a dental mirror works fine

Something like it could be made smaller. The nice thing about it is that the mirror is below the bubble so you can still look down on the bubble if you need to.

[bigwade]

Something like this:
http://tinyurl.com/ybt4hyy