Assembling old Nodal Ninja 3 on a new R-D16 rotator

Welcome to Nodal Ninja Forum

+ Reply to Thread
Results 1 to 2 of 2

Thread: Assembling old Nodal Ninja 3 on a new R-D16 rotator

Share/Bookmark
  1. Assembling old Nodal Ninja 3 on a new R-D16 rotator

    #1

    I purchased a new R-D16 rotator to upgrade my older Nodal Ninja 3. The kit came with two small, clear/whitish o-rings. Where do those o-rings go:
    on the two plastic stubs on the adapter plate which then insert into the 2 holes in the top of the R-D16 rotator, or
    in the two holes in the plastic adapter plate that the brass pins in the horizontal arm then insert into?
    Thanks
  2. Re: Assembling old Nodal Ninja 3 on a new R-D16 rotator

    #2
    Users Country Flag
    Join Date: Apr 2008
    Location: Hong Kong
    Posts: 2,366

    Quote Originally Posted by mlearmonth View Post
    I purchased a new R-D16 rotator to upgrade my older Nodal Ninja 3. The kit came with two small, clear/whitish o-rings. Where do those o-rings go:
    those o-rings go to the pan lock knob and detent plunger knob. They are spare parts for RD16.


    on the two plastic stubs on the adapter plate which then insert into the 2 holes in the top of the R-D16 rotator, or
    in the two holes in the plastic adapter plate that the brass pins in the horizontal arm then insert into?
    Thanks
    Stubs go the the rotator holes.


    Nick



    Fanotec
    We listen. We try harder.
+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts