Thread mounting screw on tripod

Welcome to Nodal Ninja Forum

+ Reply to Thread
Results 1 to 3 of 3

Thread: Thread mounting screw on tripod

Share/Bookmark
  1. Thread mounting screw on tripod

    #1

    I'm hoping to make use of an old SLIK tripod from which I've removed the head. This tripod uses a 1/4 inch thread for mounting.

    The Nodal Ninja MKII features list says it has a 3/8-1/4 inch thread mount adapter screw and I've watched the video demonstration where it says it will mount to a 1/4 inch thread.

    My question/concern here is, will using the 1/4 inch mounting option throw off the no-parallax point camera settings shown on this website? (www.nodalninja.com/html/nikon_settings.html)
  2. Re: Thread mounting screw on tripod

    #2
    Users Country Flag
    Join Date: Apr 2008
    Location: Saddleworth UK
    Posts: 242

    No the adapter is concentric with the normal 3/8 hole ... so there is no change.

    Of course you must remove it from its storage hole and screw it into the central one......
  3. Re: Thread mounting screw on tripod

    #3
+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts