Custom Camea Plate

Welcome to Nodal Ninja Forum

+ Reply to Thread
Results 1 to 2 of 2

Thread: Custom Camea Plate

Share/Bookmark
  1. Custom Camea Plate

    #1

    I use the NN5L and Canon G9 with Canon Wide Converter WC-DC58B.
    It requires using the NN Camera Plate and NN "T" adapter with an offset of 13mm.

    Is it possible to have a custom made camera plate that will have the same dimensions (height for clearing the wide angle lens from the upper arm and the offset to center the lens on the center line of the upper arm) ?

    This is to simplify the setup and to get a more sturdy assembly (less flex) ?

    Thanks,
    Guy.
  2. Re: Custom Camea Plate

    #2
    Users Country Flag
    Join Date: Apr 2008
    Location: Hong Kong
    Posts: 2,420

    Quote Originally Posted by fisherg View Post
    I use the NN5L and Canon G9 with Canon Wide Converter WC-DC58B.
    It requires using the NN Camera Plate and NN "T" adapter with an offset of 13mm.

    Is it possible to have a custom made camera plate that will have the same dimensions (height for clearing the wide angle lens from the upper arm and the offset to center the lens on the center line of the upper arm) ?

    This is to simplify the setup and to get a more sturdy assembly (less flex) ?

    Thanks,
    Guy.
    our QRS2 will serve you better. It has similar thickness to a cmera mounting plate + T-adapter. It compensates off-set up to 40mm.
    http://store.nodalninja.com/product_p/qrs-2.htm


    Nick



    Fanotec
    We listen. We try harder.
+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts