Exposure bracketed pano on Willamete River, Ship, steel bridge

[Castillonis]

Exposure bracketed using Nintendo Panocam at ISO 100, f/8, {4, 9, 19, 39, 88 } seconds, 20mm, 2900 Kelvin.
Used n15 every 24 degrees on my NNL5.

krpano
http://www.stoneyphoto.com/examples/...nhanceLDR.html

[Bill Bailey]

Great HDR - gives the image a bit more added punch!
If you haven't ever taken the Willamette River Jet Boat Tours I would highly recommend it.
Keep up the great work and thanks for sharing.
Bill

[Castillonis]

I shot the 360 panoramas for their ships that are on their web site. I took a 360 pano that is on 360cities.net that shows the Hunt for red October submarine and one of the Jetboats. I will have to try out the jet boat.

http://www.360cities.net/image/uss-b...and-oregon-usa
http://www.360cities.net/image/willa...and-oregon-usa
http://www.portlandspirit.com/spirtech.php

[Castillonis]

St John's Bridge, 22mm, n=15

[jwigum]

Very nice!

If you don't mind my asking, what was your workflow for the HDR?
Did you stack the images individually for each view(and then stitch separately), or let a stitcher like PTgui do it all from a ton of images?

[Castillonis]

I use the details enhance and hdr mode in photomatix using the bracketed set of camera RAW files. I enable alignment by feature and check do not crop. I use 16 bit TIFF and a HDR format such as radiance or openEXR. I then stitch the images in Ptgui or Autopano Pro. Then I do edits in CS3 extended. The bridge had 7 brackets per position which took about 15 minutes and 25 seconds per panorama head position.

[jwigum]

Thanks much, I was curious how you'd gone about it. Sounds like a labor of love!