Canon 40D + Canon 10-22 mm
Results 1 to 3 of 3

Thread: Canon 40D + Canon 10-22 mm

  1. Canon 40D + Canon 10-22 mm


    Hi all,

    After a couple of trials, it was pointed out to me else where that the settings for the 40D+10-22 needs to be adjusted. I have a NN3 MKII head and I used the settings recommended in the camera settings.
    Anyways, I tried to recalculate the numbers manually and came up with this:

    Lower Rail 'A' = 43 mm
    Upper Rail 'B' = 104.5 mm

    If I could push the camera backward a little more I would have because the settings in B is the closest thing to correct but not exactly.

    Can someone confirm the numbers?
  2. Re: Canon 40D + Canon 10-22 mm


    I use lower rail of 38.

    upper rail i am using with a quick release plate thus will not be accurate for your case.

  3. Re: Canon 40D + Canon 10-22 mm


    Quote Originally Posted by Aussie Ninja
    *Suggested Starting Point*
    Canon 40D without Battery Grip using Canon 10-22mm @ 10mm
    Upper Rail 93mm
    Lower Rail 48mm/58mm with NN camera plate.
    Aussie Ninja
    Thanks for the replies. I used these settings as a suggested starting point. After a couple of trails in stitching 360x180 panos someone pointed out that i need to recheck the numbers because of some minor parallax errors. I rechecked the settings through manual testing to find the n.p.p. and these are the numbers I came up with. I am sharing them here to see if someone can confirm it.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts