Kronborg Castle, Denmark - Thanks everybody for Your help

Welcome to Nodal Ninja Forum

+ Reply to Thread
Results 1 to 6 of 6

Thread: Kronborg Castle, Denmark - Thanks everybody for Your help

Share/Bookmark

Hybrid View

  1. Kronborg Castle, Denmark - Thanks everybody for Your help

    #1

    Just wanted to thank everybody helping out a newbieĶ

    After 1,5 weeks after I recived my NN3 MKII Im was able to make this 360x180 panorama.
    http://viewat.org/?i=en&id_pn=2427&rc=1&sec=pn

    A special thanks to john Houghton

    Regards
    Peter
  2. Re: Kronborg Castle, Denmark - Thanks everybody for Your help

    #2
    Users Country Flag
    Join Date: Apr 2008
    Location: Hong Kong
    Posts: 2,438

    good start.
    nice place.
    I can see some stitching errors. some steps or discontinuity.
    the ultra-wide display window seems strange to me.


    nick



    Fanotec
    We listen. We try harder.
  3. Re: Kronborg Castle, Denmark - Thanks everybody for Your help

    #3

    Quote Originally Posted by nick fan View Post
    the ultra-wide display window seems strange to me.
    Yes, it's far too wide, but it looks normal enough when you switch into fullscreen mode. It's not at all bad, but it could do with levelling properly to get the verticals vertical. This can be done during stitching (it takes about 40 seconds to level it accurately with t1 control points), or you can level the stitched equirectangular image in exactly the same way by starting a new project with it. See http://www.johnhpanos.com/levtut.htm

    John
  4. Re: Kronborg Castle, Denmark - Thanks everybody for Your help

    #4

    Not bad at all for beginner - especially with attempting full spherical panos such as this
    Just goes to show the learning curve isn't all that steep. It's easy for a novice can get out and produce respectable results straight away. The downhill path is a matter of tweaking and adjusting as well as learning short cuts and tricks to enhance your end output.
    My little suggestion would be to give your set your panos into a given frame (unless doing full screen).
    Keep up the great work!
    Cheers
    Bill
  5. Re: Kronborg Castle, Denmark - Thanks everybody for Your help

    #5

    So I gave the panorama an overhaul in according to the welcome input, this time I think Ive got the verticals vertical, and solve some of the stitching alignment errors, primarily in the fountain and tiles surrounding it. Only a few errors left nowĶ. http://viewat.org/?i=en&sec=pn&id_pn=2427

    Thanks again
    Peter
  6. Re: Kronborg Castle, Denmark - Thanks everybody for Your help

    #6

    Quote Originally Posted by Touareg View Post
    So I gave the panorama an overhaul in according to the welcome input, this time I think Ive got the verticals vertical, and solve some of the stitching alignment errors, primarily in the fountain and tiles surrounding it. Only a few errors left nowĶ. http://viewat.org/?i=en&sec=pn&id_pn=2427
    Thanks again
    Peter
    Hey Peter - looks very good to me. It's hard to draw a line when it comes to seeking critiques - especially with our own work. It is my opinion most folks doing panoramas seek perfection. The perfect stitch, perfect exposure, perfect HDR merge etc. In beginning much of this can be a challenge but the more panos you do the better the work flow and the more refined the work becomes. This is a very good start for you for sure.
    Bill
+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts