NN3 and lens problem
Results 1 to 5 of 5

Thread: NN3 and lens problem

  1. NN3 and lens problem


    I have a Canon 400d ( rebel XTi ) and a Sigma 10-20mm lens, I cant mount the lens on the top arm at the spacing recommended i.e between 93 and 99 depending on focal length. because the lip for the lens hits the Nodal Ninja arm and the lens ring (to change the focal length) also presses against the side of the arm

    please see the photo attached to explain

    Any suggestions on what I need to do to get round this problem ?

    Thanks for any help offered

  2. Re: NN3 and lens problem

    Users Country Flag Macro's Avatar
    Join Date: Apr 2008
    Location: South Korea
    Posts: 80

    Hi Tony,

    Welcome to the NN forums.

    You might consider using the N-CP1 Camera Mounting Plate which provides more clearance between your camera body and NN3 rail.

    Check this page for info...

  3. Re: NN3 and lens problem


    Thanks Macro

    Its very annoying that after spending a lot of money on this kit, you then need to buy extras before you can use it !! >


  4. Re: NN3 and lens problem


    Hi Tony,
    Marco is right - you do need the Camera Mounting plate (N-CP1) with this lens. You could also use the t-20 t-adapter but I believe the CP to be a better choice. Do NOT mount and use the camera/lens as you have shown in the image - you might damage your lens.
    Touch bases with me off site - bill[at]nodalninja[dot]com. I have a used t-adapter I can offer you for free.

  5. Re: NN3 and lens problem


    Thanks Bill I would really appreciate that

    I have sent you an email off line


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts