settings to Fanotec QRS

Hello,
My name Wojtek from Poland. its my first thread in this Forum :clap:
I have NN4 with Fanotec QRS and 5D mark II - sigma 15 mm - I am looking for table with this set configuration, but i found only with CP2 - . i am not sure my new settings.
Maybe someone has thats set and help me


all the best
Wojtek

Hi Wojtek,

Welcome to the forum. To give you basic advice, I need info about the quick release system you use. There is one which is named QRS2, and one arca style quick release system.
http://www.nodalninja.com/support/QRS2.html

Anyway, QRS will add thickness to CP-2 settings. This means the camera and lens axis will move to the left using a QRS related to the lower rail.

The offset for the lower rail are the same for NN3 NN4 and NN5.

Attachment 671

This means you have to add 11 or 12mm to your lower rail setting depending on the QRS you use.

Feel free to ask,
Heinz