Printable View
I'm currently using a NN3 with an arca-swiss compatible clamp on the upper rail, so I can easily mount and dismount my camera from the pano head.
I'd like to switch to an arca-swiss compatible system that clamps the camera in the exact same place each time. I want the system to be accurate enough that it could be used for batch stitching with a better pano head in the future.
There are a lot of different NN clamps and plates, and I'm not sure which one(s) would be suitable for me?
Thanks
Dave
what is your camera?
Nick
Hi Nick
I'm using the Canon 5D mkII with Tokina 10-17mm fisheye (shaved).
Cheers
Dave
this one should fit your needQuote:
Originally Posted by Dave Kennard
http://store.nodalninja.com/index.ph...em-asqrs2.html.
Do you still have 22mm clearance on the lower rail for accommodating other QR system which is typically >22mm?
Nick
My current QR clamp has a depth of about 16mm, but there is (just) enough room on the lower rail for a clamp with depth of 22mm.
Looking at the ASQRS2 images, it looks like a standard clamp and plate with a line on both that you line up. (i.e. accuracy depends on making sure the lines on the clamp and plate are aligned correctly rather than using locking pins to lock the plate in place). Do you think this would be accurate enough for batch stitching with the NN4? (I know you don't promote the NN4 as having repeatable results, but people seem to have had good success batch stitching with the NN5.)
Cheers
Dave