The NN Mysteries of Sony NEX-5 for Demon Duck
your problems seem to be solved:
Attachment 327Attachment 328Attachment 329Attachment 330Attachment 331
The plates stand out 0.65", 16mm. This is done to use full length of the base plate for the upper rail and keep the thin plate moveable to adapt it to your own camera, same as normal CP-2 plate principle.
The top plate touches the camera bodies front by cutting out the lens circle and a corner for the outstanding button.
If you like it, IM your address and I can send it on friday. For nothing to get you out of frustration. May be you could send your CP-2 in reverse to me.
If you like changes, I can try to fit it.
BTW: Body arrived at 5.30 pm, now it is nearly 8pm.:th_wink: