New Pole System From Fanotec

Hi,

I think it was one of these: http://www.velbon.co.uk/newvelbon/pa...amaximini.html

This is the one I use: http://www.gitzo.com/product/72038.7...section_Tripod

Regards,

Heinz

Quote:

---

Originally Posted by NorthBayPanos

Do you know what tripod was on the bottom of the pole in Az.? It's in the pix.:thumbup:

---

As indicated by Heinz, it's Velbon Maxi Mini tripod :wink:
Vincèn

The Gitzo sure looks like a good one. But kinda heavy no? As I recall the Velbon was robust enuf for a pole mount application used with common sense ie: remove lens caphttp://www.nodalninja.com/images/smi...001_unsure.gif:001_unsure:
Thanx for the replys den

Quote:

---

Originally Posted by NorthBayPanos

ie: remove lens cap:001_unsure:

---

it remembers me something :thumbup: :rockon:

I decided for the Gitzo cause I like to have more weight at the foot of the construction. Second, it comes with a plate to directly place the rotator or monopod on top. It is the "power disk".
Third, you can extend the legs and set them in three different positions. Lowest position gives a circle of 76cm, and you can easily place your foot on it to stabilize for longer poles.

But yes, you are right, it is heavier. Velbon 590gr max load 1.5kg. Gitzo 1,34 kg max load 18kg

Heinz

Btw: I suppose most of us once upon a time forgot to take off the lens cap.:wink: And using a pole, another good trick is to set the wireless remote control on top of the camera to "On" as well. Not the easiest job to raise and get the camera down again. I don't ask for doing it for nothing, cause I forgot these little things.:angry:

Are you going to be @ PDN PhotoPlus next weekend? If so will you have some poles for purchase? (i see that you will be shipping the day it starts)