Someday a SuperUltimate NodalNinja pano head
It will have vernier screws for all adjustments rather than the slide and tighten adjustments that are used now.
It's hard to do precise adjustments with the current set up. there's a small amount of twist in all three axises of each adjustment and loosening -- sliding -- tightening procedure can be very frustrating.
It won't be cheap but the pro's will like it -- I think :ohmy:
But this is just my opinion...
Re: Someday a SuperUltimate NodalNinja pano head
you should not need more than 0.5mm accuracy in the NPP settings. Most of time, 1mm is more than enough.
Originally Posted by DemonDuck