Nodal Ninja Ultimate R1 and R10 Ring Mount Pano Heads.

Hi,

do you have any idea of the availability of Ultimate R1 without rotator?

Cheers

Quote:

---

Originally Posted by yardielion

Hi,
do you have any idea of the availability of Ultimate R1 without rotator?
Cheers

---

We do not have R1's without rotators however if you know your desired tilt we have R10's without rotators.
Bill

We now offer the R1 without rotator :-)

http://store.nodalninja.com/product_p/u-r1-no-r.htm

thx
Bill

Thanks! :001_smile:

I just received an R10, 2.5¬? .
I wonder how to use it with 0¬? tilt?
I didn't found in the notices?

You can't. Only the R1 lets you do this. What camera and lens are you using?

as for my understanding you need to unscrew the R10 vertical and flip the mount. my is on the way you should be able to do static 0, -2.5, and +2.5

Quote:

---

Originally Posted by yardielion

I just received an R10, 2.5¬? .
I wonder how to use it with 0¬? tilt?
I didn't found in the notices?

---

I've got a Tokina 10-17 with 5D....

As said in the product page of Ultimate R10 :

"Each R10 head has a set of 3 built in static tilt options (0 degree and +/- certain degrees)."

Why do you want to set it to 0 degs?

Quote:

---

Originally Posted by yardielion

I just received an R10, 2.5¬? .
I wonder how to use it with 0¬? tilt?
I didn't found in the notices?

---

unscrew the vertical rail and the QR clamp. install the vertical rail with the slanted edge facing down. install the QR clamp. Done.
If you want -2.5 deg, unscrew the vertical rail (and the QR clamp if you want to keep the handle at the same side), flip the vertical rail vertically, reinstall the vertical rail.


Nick

Ahh!

Thanks for your help :biggrin:

thanks. very helpful post. I read a few of your other posts and they all helped me.

1. Will you be making a ring clamp for the Nikon 14-24mm f2.8 zoom in the near future -- lots of pros and semi pros using this lens now and would love to see a ring clamp for it.

2. I see there is a ring clamp listed for the Nikon 16mm fisheye - does the lens hood need to be cut. On that lens, it is steel and next to impossible to cut.

3. Is the Nikon 16mm clamp available immediately?

Thanks.

Quote:

---

Originally Posted by ptortora

1. Will you be making a ring clamp for the Nikon 14-24mm f2.8 zoom in the near future -- lots of pros and semi pros using this lens now and would love to see a ring clamp for it.

---

Never. it won't have any advantage to make a ring for large lens.

Quote:

---

2. I see there is a ring clamp listed for the Nikon 16mm fisheye - does the lens hood need to be cut. On that lens, it is steel and next to impossible to cut.

3. Is the Nikon 16mm clamp available immediately?

Thanks.

---

For 16mm fisheye, you need FX sensor. no need to shave the hood.
Ring is available now.
http://store.nodalninja.com/product_p/u-r-n16.htm