about the maximum number of stops in Fanotec rotators

Quote:

---

Originally Posted by nick fan

on a second thought, I am not sure people want such a large rotator. It is going to be heavy. maybe a smaller rotator with finest interval of 3.75 deg will be better.


nick

---

I am not sure the weight would matter that much, especially in the studio.
Could You not mill away most of the inner material as it will be doing virtually nothing.

Quote:

---

Originally Posted by John Houghton

Dorin, In the cross eye variant, the left image seems stretched horizontally for some reason. It makes for uncomfortable viewing.

John

---

A second reply to this, thanks to fiero, with the latest DevalVR 0,7,5,6 one can use a single .mov wich can be display with the desired frame offset in a particular DevalVR window (left or right)

left.dvl

Code:

---

(pano)
{
  type=mov;
  file=adidas.mov;
}

---

right.dvl

Code:

---

(pano)
{
  type=mov;
  file=adidas.mov;
  offsetxobject=-1;
}

---

this should work properly now.
http://dorin.devalvr.com/dxn_OM/adid...crosseye2.html

Dorin

Quote:

---

Originally Posted by Terrywoodenpic

Could You not mill away most of the inner material as it will be doing virtually nothing.

---

Still, the weight is proportional to the cross section area of the rotator. So it increases drastically with the diameter.


Nick