Announcement

Collapse
No announcement yet.

RS-2 settings with 5D2 & shaved Tokina 10-17 @ 12mm

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • RS-2 settings with 5D2 & shaved Tokina 10-17 @ 12mm

    as per title, anyone nailed the upper & lower rail settings for 5D2 & shaved Tokina 10-17 @ 12mm for either the RS-1 or RS-2...?

    thanks

    Stu

  • #2
    Bump!

    Comment


    • #3
      This particular combination is perhaps not very common. However, since there is only one adjustment possible, it shouldn't take more than 5-10 minutes or so to determine the settings yourself. There's probably very little change in the settings over the lower range of focal lengths. See http://www.johnhpanos.com/epcalib.htm .

      John

      Comment


      • #4
        Originally posted by John Houghton View Post
        However, since there is only one adjustment possible...
        Oops - sorry, I had in mind the R1. The RS-1 of course has the lower rail adjustment too. It still won't take longer than 15min to set up.

        John

        Comment


        • #5
          Hi Stu,

          Here's a way to get to know about you LRS settings:

          http://www.nodalninja.com/forum/show...d-LRS-for-RS-1

          For RS-2 you have to add 4mm instead of RS-1 because of different vertical rails and rotator measurements. H remains the same , depends on the lens ring you use.

          Heinz.
          Last edited by hindenhaag; 10-09-2013, 07:52 AM.

          Comment

          Working...
          X