Announcement

Collapse
No announcement yet.

NN5 + Canon 600D + Samyang 8 mm f/3.5

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • NN5 + Canon 600D + Samyang 8 mm f/3.5

    Welcome

    I have a question for you that you are using the parameters set for the head in this configuration. I mean NN5 + Canon 600d + Samyang 8 mm f/3.5
    Of course, in this case, the apparatus may be from Canon 350D to 600D are dimensionally similar.

  • #2
    Hi and welcome to the forum.

    http://wiki.panotools.org/Entrance_Pupil_Database

    H + 13mm for the reference point of the vertical rail is LRS = Lower Rail setting: 53

    L1 + L2 gives you URS = upper rail setting = 39 + 50 = 89

    Test this with the following methods described in the links below:

    http://www.nodalninja.com/forum/show...8717#post38717

    Set lens parameter to 9mm in PTGui, because the lens is more like a 9mm fisheye. Set "minimize lens distorsion" to lens shift + heavy.

    Heinz
    Last edited by hindenhaag; 07-08-2013, 03:05 AM.

    Comment


    • #3
      Thank you for your response

      I do not use the PTGui. I'm using Autopano.

      Test for a couple of hours these parameters

      Regards

      Comment


      • #4
        You can download a trial version to do your testing? Lens parameters should be the same with autopano.

        Heinz

        Comment


        • #5
          Today I tried to hand for the values ​​and got these results:

          LRS = Lower Rail setting: 57
          URS = upper rail setting = 94,5

          in Autopano RMS 3.74

          Comment


          • #6
            Thx for letting us know.

            Heinz

            Comment


            • #7
              Welcome

              Today I made more accurate measurements and got these results:

              LRS = Lower Rail setting: 58
              URS = upper rail setting = 93,5 +/- 0.5 mm

              Comment

              Working...
              X